← Latest papers
🔬 mesoscale physics

Gatemon qubits based on in-situ ternary InAsSb/Al nanowire Josephson junctions

This paper demonstrates the realization of coherent, gate-tunable gatemon qubits using in-situ grown ternary InAsSb/Al nanowire Josephson junctions, achieving Rabi oscillations and relaxation times up to 0.79 µs that validate their potential for hybrid quantum circuits.

Original author: Zhenhai Sun, David Feldstein-Bofill, Sangeeth Kallatt, Sabbir A. Khan, Morten Kjaergaard

Published 2026-11-13
📖 5 min read🧠 Deep dive

Original author: Zhenhai Sun, David Feldstein-Bofill, Sangeeth Kallatt, Sabbir A. Khan, Morten Kjaergaard

Original paper licensed under CC BY 4.0 (http://creativecommons.org/licenses/by/4.0/). ✨ This is an AI-generated explanation of the paper below. It is not written or endorsed by the author. For technical accuracy, refer to the original paper. Read full disclaimer

In the quest to build a quantum computer, scientists are trying to create tiny machines that can solve problems far beyond the reach of today's most powerful supercomputers. To do this, they need to build artificial atoms called qubits, which can exist in multiple states at once. One of the most successful ways to make these qubits is by using superconducting circuits, materials that conduct electricity with zero resistance. Traditionally, these circuits rely on a specific type of barrier made of an insulator sandwiched between two superconductors to create the necessary non-linear behavior. However, researchers have been exploring a different path: replacing that insulating barrier with a tiny segment of semiconductor material. This creates a device known as a gatemon, where an electrical gate can tune the properties of the junction, much like a faucet controls the flow of water. This approach is attractive because it allows for precise control and offers a window into the microscopic physics of how electrons move through these hybrid materials.

A team of researchers at the Niels Bohr Institute in Copenhagen has now demonstrated that they can build these gatemon qubits using a unique type of nanowire made from a mixture of indium, arsenic, and antimony, coated in aluminum. The key to their success was a clever manufacturing trick called shadow deposition. Instead of cutting away parts of the material after it is grown, which can damage the delicate surfaces, they grew the nanowires and then deposited the aluminum coating from a specific angle. The nanowire itself acted as a shadow, blocking the aluminum from reaching a small section in the middle. This left a pristine, uncovered segment of the semiconductor wire connecting two superconducting regions. Because no harsh chemicals were needed to carve out this weak link, the resulting junction remained clean and highly transparent to electrons.

The researchers then connected these nanowire junctions to a microwave resonator, a device used to listen to the quantum state of the qubit. By applying a voltage to a gate electrode placed near the wire, they were able to tune the frequency of the qubit over a range of several gigahertz. This electrical control is a hallmark of the gatemon design. When they probed the device with microwave pulses, they found that the qubit behaved as expected, showing a distinct frequency that could be shifted up and down by changing the gate voltage. They also measured how "anharmonic" the system was, which determines how well the qubit can be distinguished from other energy levels. They found the anharmonicity was smaller than in traditional designs, a result that aligns with the theory that electrons are moving through highly transparent channels in the semiconductor.

To prove that these devices were truly quantum mechanical and not just noisy circuits, the team tested their ability to maintain a coherent state. They performed a series of experiments where they excited the qubit and watched how it evolved over time. They observed Rabi oscillations, which are rhythmic swings in the quantum state driven by microwave pulses, confirming they could control the qubit with high precision. They also measured how long the qubit could hold its energy before losing it, a property known as the relaxation time. In one representative device, the qubit held its state for 0.79 microseconds. They also measured how long the qubit maintained its phase coherence, finding a value of 0.91 microseconds. These times are long enough to perform basic quantum operations, proving that the InAsSb/Al junctions can function as coherent circuit elements.

The team did not stop at a single device; they tested five different gatemons spread across three separate chips to see if the results were reproducible. The relaxation times for these devices ranged from about 0.2 microseconds to 1.0 microseconds. They noticed a trend where the qubits with higher frequencies tended to lose their energy faster. To understand why, they compared their measurements to a simple calculation of how much energy a qubit naturally leaks into its electromagnetic surroundings. They found that the measured loss rates were very close to what would be expected if the qubit were simply radiating energy into the environment, a process known as spontaneous emission. This suggests that the limitations they observed were likely due to the circuit design and how the qubit was coupled to its surroundings, rather than a fundamental flaw in the semiconductor material itself.

This work establishes that nanowires made from ternary alloys like InAsSb can serve as the foundation for tunable, coherent quantum circuits. By using a shadow-defined growth process, the researchers avoided the surface damage that often plagues other fabrication methods, creating a clean weak link that responds well to electrical control. While the current devices are limited by their connection to the microwave environment, the results show that the material itself is capable of supporting quantum coherence. This opens the door for future designs that can better isolate the qubit from external noise, potentially leading to more robust quantum computers and providing a new tool for studying the complex behavior of electrons in hybrid superconducting systems.

Drowning in papers in your field?

Get daily digests of the most novel papers matching your research keywords — with technical summaries, in your language.

Try Digest →