← Latest papers
🔬 mesoscale physics

Electrical addressing of compensated magnetic order in artificial spin ice

This paper demonstrates the electrical writing and reading of all eight magnetization states, including fully compensated ones, in a triangular artificial spin ice by leveraging spin-orbit torque switching and the planar Hall effect, thereby establishing a pathway for electrically programmable compensated magnetic systems.

Original author: Stéphane Nilsson, Lauren J. Riddiford, Emily Darwin, Hans J. Hug, Aleš Hrabec, Laura J. Heyderman

Published 2026-11-18
📖 6 min read🧠 Deep dive

Original author: Stéphane Nilsson, Lauren J. Riddiford, Emily Darwin, Hans J. Hug, Aleš Hrabec, Laura J. Heyderman

Original paper licensed under CC BY 4.0 (http://creativecommons.org/licenses/by/4.0/). ✨ This is an AI-generated explanation of the paper below. It is not written or endorsed by the author. For technical accuracy, refer to the original paper. Read full disclaimer

In the world of electronics, information is often stored by flipping tiny magnetic switches, much like the north and south poles of a compass. For decades, engineers have relied on materials that act like strong magnets, where all the tiny internal arrows point in the same direction. While effective, these materials create their own magnetic fields that can spill over and interfere with neighboring devices, limiting how closely they can be packed together. To solve this, scientists have long looked toward a different kind of material: one where the internal magnetic arrows point in opposite directions, canceling each other out. These "compensated" systems, such as antiferromagnets, generate no stray fields, making them immune to interference and capable of switching states incredibly fast. However, a major hurdle has remained: because these materials have no net magnetic pull, they are notoriously difficult to control and read using electricity. Writing a message into them or reading what is written has been like trying to steer a ghost ship with a magnetic compass; the tools simply do not work.

A team of researchers has now found a way to overcome this obstacle using a clever, man-made structure called artificial spin ice. Instead of trying to manipulate a solid block of material, they built a grid of tiny, isolated magnets that interact with one another. By arranging these magnets in a specific triangular pattern, they created a system that mimics the behavior of complex compensated materials but is large enough to be seen and measured directly. In a new study, the team demonstrated that they could write and read every possible magnetic configuration in this grid using only a single electrical wire. They achieved this by sending carefully timed pulses of electricity through a heavy metal layer beneath the magnets. These pulses generate a subtle force that can flip the direction of individual magnets without needing any external magnets to help. By tuning the angle of the magnets and the direction of the electrical current, the researchers could switch specific groups of magnets independently, allowing them to access all eight possible states of the triangular unit, including the elusive state where the magnetic forces are perfectly balanced and the net magnetization is zero.

The device itself is a small chip, roughly the size of a grain of sand, featuring a grid of nanomagnets made from layers of cobalt, iron, boron, and other metals. These magnets are shaped like tiny stadiums, measuring 350 nanometers by 100 nanometers, and are arranged in triangles. Beneath this grid lies a channel of heavy metal, specifically tantalum and tungsten, through which the researchers send electrical current. When a pulse of electricity flows through this channel, it creates a torque, a twisting force, that can flip the magnetic orientation of the nanomagnets sitting on top. The key to the experiment was realizing that the amount of current needed to flip a magnet depends heavily on the angle between the magnet's long axis and the direction of the current. If the magnet is nearly perpendicular to the current, it flips easily with a small pulse. If it is nearly parallel, it requires a much stronger pulse.

The researchers exploited this difference to gain precise control. They oriented the magnets in the triangular grid so that the three sides of each triangle pointed in different directions relative to the current channel. This meant that each side of the triangle had a unique "switching threshold." By sending a pulse of a specific strength, they could flip the magnets on one side of the triangle without affecting the other two. By varying the pulse strength, they could selectively switch any combination of the three sides. This allowed them to reach all eight possible magnetic states of the triangle. One of these states is particularly important: the fully compensated state, where the magnetic arrows of the three sides point in a way that cancels out completely, leaving no net magnetic field. In previous attempts to control such states, scientists often struggled because the lack of a magnetic field made them invisible to standard electrical sensors.

To read the state of the magnets, the team used a technique called the planar Hall effect. When a small, steady current is passed through the metal channel, the voltage measured across the channel changes depending on the direction of the magnets above it. Crucially, the researchers found that by changing the angle of a small external magnetic field used during the measurement, they could make the signal from one specific side of the triangle disappear while the others remained visible. This tunability allowed them to distinguish which magnets had been flipped. For example, by adjusting the measurement angle, they could see the switching of one group of magnets while ignoring the others, effectively reading the state of the system with high precision.

The results were confirmed using magnetic force microscopy, a technique that uses a tiny, sensitive probe to map the magnetic landscape of the surface. The images showed that the electrical pulses had successfully reconfigured the magnets into the desired patterns, including the complex, flux-closed loops that characterize the compensated state. Even though this state has zero net magnetization, the electrical readout still produced a clear, measurable signal. This proves that it is possible to electrically write and read a compensated magnetic order without needing a net magnetic moment. The study also ruled out the possibility that the switching was caused by the magnetic field generated directly by the electric current, known as the Oersted field, confirming that the effect was driven purely by the spin-orbit torque.

This work establishes a new method for controlling magnetic systems that was previously thought to be extremely difficult. By using a single current channel to address multiple magnetic sublattices independently, the researchers have created a platform where the magnetic state can be programmed and read electrically. The system exhibits a history-dependent response, meaning the electrical signal depends on the sequence of pulses used to reach a state, a property that is essential for advanced computing architectures like physical reservoir computing. While the current device is a laboratory-scale model, the principles demonstrated here offer a pathway toward reconfigurable magnetic devices and unconventional computing systems that are faster, denser, and more robust than current technologies. The ability to access and read the fully compensated state electrically removes a significant barrier to using these materials in practical applications, opening the door to a new generation of spintronic devices.

Drowning in papers in your field?

Get daily digests of the most novel papers matching your research keywords — with technical summaries, in your language.

Try Digest →