← Latest papers
🔬 materials science

Label free sub-diffraction imaging using non-linear photon avalanche backlight

This paper introduces and experimentally demonstrates Transmission Avalanche Backlight (TAB) microscopy, a label-free, far-field imaging technique that leverages the non-linear optical properties of photon avalanching materials to achieve sub-diffraction resolution (approximately 70 nm) and enhanced contrast for transparent samples using a simple single-beam laser scanning setup.

Original authors: Suresh Karmegam, Marcin Szalkowski, Malgorzata Misiak, Katarzyna Prorok, Damian Szymański, Artur Bednarkiewicz

First appeared 2025-07-19 · Updated 2026-11-13
📖 5 min read🧠 Deep dive

Original authors: Suresh Karmegam, Marcin Szalkowski, Malgorzata Misiak, Katarzyna Prorok, Damian Szymański, Artur Bednarkiewicz

Original paper licensed under CC BY 4.0 (http://creativecommons.org/licenses/by/4.0/). ✨ This is an AI-generated explanation of the paper below. It is not written or endorsed by the authors. For technical accuracy, refer to the original paper. Read full disclaimer

Seeing the invisible world of cells, viruses, and tiny machines has always been a struggle for scientists. Light, the tool we use to see, has a natural limit: it cannot focus on anything smaller than about half its own width. This means that for decades, the finest details of biological life or the smallest components of new technology have remained blurry, hidden behind a wall of diffraction. To peer past this wall, researchers have traditionally relied on fluorescent tags—glowing dyes or particles attached to the object of interest. While effective, these tags can be toxic to living cells, fade away under bright light, or alter the very behavior they are meant to observe. Furthermore, the microscopes required to use these tags are often complex, expensive, and difficult to operate. The scientific community has long sought a way to see these sub-microscopic structures clearly without sticking anything onto them, using a method that is both gentle and straightforward.

A team of researchers in Poland has now proposed and tested a new approach that bypasses these limitations entirely. They call their technique Transmission Avalanche Backlight microscopy. Instead of trying to make the sample glow, they place the sample on top of a special crystal that acts as a giant, glowing light source. This crystal is doped with thulium ions, a type of rare earth element that behaves in a highly unusual way when hit with a specific laser beam. Normally, if you shine a light on a material, the brightness of the glow increases steadily as you make the light brighter. However, this crystal operates on a principle called photon avalanching. Once the laser reaches a certain threshold, the crystal's glow does not just increase; it explodes upward in intensity. A tiny, almost imperceptible change in the amount of light hitting the crystal results in a massive, dramatic shift in how brightly it shines.

The researchers used this extreme sensitivity to their advantage. They placed a thin, transparent sample, such as a layer of gold or a biological cell, directly on top of the glowing crystal. When they scanned a laser beam across the setup, the crystal acted as a backlight. If the laser hit a clear spot, the crystal glowed brightly. But if the laser passed through even a tiny, nearly invisible part of the sample that blocked or scattered just a fraction of the light, the crystal's response was immediate and severe. Because of the crystal's explosive nature, that tiny drop in incoming light caused the glow to dim significantly. This allowed the researchers to see the faintest shadows of transparent objects with a clarity that standard light microscopy could never achieve.

In their experiments, the team demonstrated that this method could reveal details far smaller than the physical limit of light. They tested the system on thin gold films and found that it could distinguish features as small as 30 to 50 nanometers. To put this in perspective, the light used in their setup has a wavelength significantly larger than the features they could see, meaning they could see objects roughly twenty times smaller than the light wave itself. The images produced showed distinct edges and structures that were completely invisible in standard white light photos. The researchers also showed that the technique could track changes in real-time. By using a laser to heat and reshape the gold film, they watched the material transform from a smooth sheet into tiny, scattered islands. The new microscope captured this evolution instantly, highlighting the differences in thickness and density without needing any chemical stains or labels.

The study also explored how this method interacts with different materials. The researchers found that the crystal's response could reveal not just how much light a sample blocked, but also how the sample interacted with the crystal itself. In some cases, the sample might absorb energy from the crystal or change its internal energy flow, causing the glow to dim in a specific pattern. By analyzing these patterns, the team could distinguish between simple blocking of light and more complex physical interactions. This suggests the technique could eventually be used to map temperature changes or study how molecules behave on a surface, all without touching the sample.

While the current setup uses a relatively large crystal and works best when the sample is placed directly on top, the researchers acknowledge that future work will need to refine the materials to make them thinner and more uniform. They also noted that the high power of the laser required to trigger the effect could potentially heat sensitive biological samples, so careful control will be necessary for living cells. Nevertheless, the results prove that it is possible to break the diffraction limit using a simple, single-beam laser and a cleverly chosen crystal. This approach offers a new path for observing the delicate machinery of life and the intricate architecture of nanomaterials, providing a clear, label-free window into a world that was previously too small to see.

Drowning in papers in your field?

Get daily digests of the most novel papers matching your research keywords — with technical summaries, in your language.

Try Digest →