← Latest papers
🔬 optics

Interfacing Silicon Nitride Nanophotonics with Cuprous Oxide Rydberg Excitons

This paper demonstrates a monolithic, CMOS-compatible interface between silicon nitride nanophotonic waveguides and cuprous oxide Rydberg excitons, successfully coupling excitonic emission into guided modes to establish a scalable platform for nonlinear quantum nanophotonics.

Original author: Artem Kryvobok, Hamza Ather, Julio Herreros García, Ziqi Niu, Abhishek Bharatbhai Solanki, Vahagn Mkhitaryan, Benjamin Cerjan, Alexandra Boltasseva, Vladimir M. Shalaev, Hadiseh Alaeian

Published 2026-11-20
📖 6 min read🧠 Deep dive

Original author: Artem Kryvobok, Hamza Ather, Julio Herreros García, Ziqi Niu, Abhishek Bharatbhai Solanki, Vahagn Mkhitaryan, Benjamin Cerjan, Alexandra Boltasseva, Vladimir M. Shalaev, Hadiseh Alaeian

Original paper licensed under CC BY 4.0 (http://creativecommons.org/licenses/by/4.0/). ✨ This is an AI-generated explanation of the paper below. It is not written or endorsed by the author. For technical accuracy, refer to the original paper. Read full disclaimer

In the quest to build computers that use light instead of electricity, scientists face a stubborn problem: light beams usually pass right through each other without interacting. To make a light-based switch or memory, you need a material that can force one photon to change the path of another, but most materials are too weak to do this unless you flood them with trillions of photons. Nature offers a workaround in the form of highly excited atoms, known as Rydberg states, where an electron is pushed far from its nucleus. These states are enormous and interact strongly with their neighbors, creating a powerful effect where one excited atom can block others nearby from becoming excited. While scientists have used this trick with clouds of cold atoms in a vacuum, the equipment required is bulky and fragile. A more practical solution would be to find a solid material that behaves like these giant atoms, offering the same strong interactions but in a chip that can be manufactured and scaled up.

Researchers have now taken a significant step toward this goal by successfully connecting a solid material that hosts these giant, interacting particles with a tiny channel for light. The team created a device where a small crystal of cuprous oxide, a reddish mineral, sits directly on top of a silicon nitride waveguide, which acts as a microscopic highway for light. When they shine a laser on the crystal, it glows, and instead of that light scattering in all directions, a portion of it is captured and guided along the chip to a specific exit point. The light emerging from the exit carries a distinct signature, proving that it traveled through the waveguide and that the crystal contains the specific, highly excited states needed for future quantum technologies. This achievement demonstrates that it is possible to build a complete system on a single chip where a solid material can control light in a way previously only possible with complex vacuum setups.

The journey to this result began with the challenge of finding a solid material that could mimic the behavior of those giant, excited atoms. Cuprous oxide is unique because it supports "Rydberg excitons," which are pairs of an electron and a hole that behave like a single particle with a wavefunction that can stretch over a micron, a size large enough to be seen under a microscope. These particles interact strongly over long distances, a property essential for creating the optical nonlinearities needed for quantum computing. However, getting these particles to talk to a light-guiding circuit was difficult. The researchers needed a waveguide material that would not glow on its own when hit by the laser used to excite the crystal, as this background noise would drown out the faint signal from the excitons. They solved this by using a special type of silicon nitride, rich in nitrogen, which remains dark under the specific green light used for excitation, unlike standard versions of the material.

The device itself is a marvel of precision engineering, built using processes compatible with standard computer chip manufacturing. The team started with a silicon chip coated in a layer of glass, upon which they etched a tiny ridge made of the special silicon nitride. This ridge serves as the waveguide, a path only a few hundred nanometers wide. Using a technique called thermal oxidation, they grew a small, faceted crystal of cuprous oxide directly on top of this waveguide, positioning it so that it straddles the channel. The crystal is about four micrometers wide and half a micrometer tall, sitting perfectly aligned with the light path. To ensure the light could enter and leave the chip without needing to be cleaved or broken, they added tiny grating structures at the ends of the waveguide, which act like ramps to lift the light out of the chip and into a detector.

When the researchers cooled the device to cryogenic temperatures and shone a green laser onto the cuprous oxide crystal, the crystal began to emit light. They set up a sophisticated observation system where they could shine the laser on the crystal from one spot and collect the light from a different spot, tens of micrometers away, through the waveguide. This spatial separation was crucial; it proved that the light they detected was not just stray reflection or background glow from the substrate, but light that had actually traveled through the waveguide. The spectrum of this collected light revealed the specific fingerprints of the cuprous oxide excitons. The researchers saw the expected glow from the lowest energy states, but more importantly, they clearly resolved the faint, sharp lines corresponding to the highly excited Rydberg states, specifically the 2p and 3p levels of the yellow exciton series.

To confirm that the light was indeed traveling as a guided wave and not just scattering randomly, the team analyzed the polarization of the light. Light traveling through a waveguide tends to align itself in a specific direction, whereas light emitted directly from a crystal is usually a mix of directions. By rotating a filter in the collection path, they observed that the light coming from the waveguide exit was strongly polarized, changing its intensity in a predictable way as the filter turned. In contrast, light collected directly from the crystal surface showed much less polarization. This difference confirmed that the waveguide was acting as a filter, selecting only the light that had successfully coupled into the guided mode and carried it to the detector.

The success of this experiment establishes a complete platform for studying how light and matter interact in a solid-state environment. The researchers have shown that they can grow the necessary crystal, build the light-guiding circuit, and measure the results all on a single chip using standard fabrication techniques. This setup removes the need for the extreme vacuum and cooling systems required by atomic gas experiments, replacing them with a robust, solid material that can be placed precisely where needed. The ability to resolve the specific energy levels of the Rydberg excitons while they are coupled to the waveguide suggests that this platform is ready for the next phase of research. Scientists can now use this device to probe how these giant excitons interact with each other and with light, potentially paving the way for new types of quantum switches and sensors that operate at the single-photon level.

Drowning in papers in your field?

Get daily digests of the most novel papers matching your research keywords — with technical summaries, in your language.

Try Digest →