← Latest papers
📄 earth science

Borehole stress profiling from inversion of injection-induced fracture displacements

This study presents an improved inversion method that utilizes three-dimensional fracture displacement data from fluid injection tests to estimate the full in situ stress tensor, successfully resolving meter-scale stress heterogeneity and significant stress rotations near fault zones within a deep borehole at the Bedretto Underground Laboratory without requiring multiple tests or assumptions about principal stress orientations.

Original authors: Kai Bröker, Yves Guglielmi, Florian Soom, Paul Cook, Marian Hertrich, Benoît Valley

Published 2026-11-19
📖 5 min read🧠 Deep dive

Original authors: Kai Bröker, Yves Guglielmi, Florian Soom, Paul Cook, Marian Hertrich, Benoît Valley

Original paper licensed under CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). ✨ This is an AI-generated explanation of the paper below. It is not written or endorsed by the authors. For technical accuracy, refer to the original paper. Read full disclaimer

Deep beneath the Earth's surface, the rock is not a static, silent solid. It is a material under immense pressure, squeezed from all sides by the weight of the ground above and the tectonic forces of the planet itself. This invisible pressure, known as stress, dictates how rock behaves. If the pressure shifts even slightly, a crack might open, a fault might slip, or a newly created fracture might grow in an unexpected direction. For engineers planning to store nuclear waste, capture carbon dioxide, or tap into deep geothermal energy, knowing exactly how this stress is oriented and how strong it is at a specific spot is a matter of safety and success. Without this knowledge, a fluid injection meant to heat rock for energy could accidentally trigger an earthquake, or a storage well might leak because the rock fractured in the wrong direction.

The challenge for scientists is that stress is difficult to measure. It is invisible, and it changes from place to place, sometimes over distances as short as a few meters. Traditional methods often rely on making assumptions, such as guessing that the stress points straight up or down, or that it is the same everywhere in a region. These assumptions can be dangerous when the ground is fractured or near a fault line. To get a true picture, researchers need to measure the stress directly where the rock is being used, capturing its full three-dimensional nature without relying on guesses.

A team of researchers recently tackled this problem deep inside a mountain in Switzerland. They drilled a borehole into the granite of the Bedretto Underground Laboratory, a facility located more than a kilometer beneath the surface. Their goal was to map the stress field along a 61-meter section of this hole, which happened to cut through a large, active fault zone. Instead of just measuring pressure, they used a sophisticated tool called SIMFIP to watch how the rock moved when they pumped water into it. By carefully analyzing the tiny shifts and slips of the rock fractures as the water pressure rose, they were able to calculate the exact direction and strength of the stress surrounding the hole.

The researchers found that the stress field is far more complex and local than previously thought. In the areas of the borehole far away from the fault, the stress behaved as expected, with the weakest pressure pointing in a consistent direction. However, as they moved closer to the fault zone, the story changed dramatically. The direction of the weakest stress began to rotate, twisting significantly as it approached the fault. In the section of the borehole closest to the fault, the stress direction had turned by nearly 70 degrees compared to the distant, undisturbed rock. This rotation was not symmetrical; the stress direction returned to normal very quickly on one side of the fault, but it took a much longer distance to settle back on the other side.

What makes this discovery particularly important is that the researchers did not need to assume the direction of the stress beforehand. Their method allowed them to see the full picture: the strongest, middle, and weakest stresses, and how they were oriented in space. They discovered that while the direction of the stress changed wildly near the fault, the actual strength of the pressure remained relatively steady. The rock was not becoming weaker or stronger; it was simply being squeezed from a different angle. This subtle shift in direction is critical because it means that a fracture created by pumping fluid could travel in a completely different path near a fault than it would a few meters away.

The study also revealed that the rock near the fault is not uniform. The zone of disturbed rock extends much further below the fault than above it, matching the physical structure of the fault itself, which has a more fractured and broken zone underneath its core. This suggests that the fault is an "immature" system, composed of many smaller, connected patches of movement rather than a single, clean break. The stress rotation observed by the team is likely caused by the rock slipping along these smaller patches and the fact that the broken rock in the fault zone is softer and more flexible than the solid granite surrounding it.

By mapping these changes with such precision, the researchers have provided a new way to understand the hidden forces shaping our underground world. Their work shows that stress is not a smooth, uniform field but a patchwork of local variations that can shift over just a few meters. For anyone looking to drill deep into the Earth, this means that a single measurement is never enough. The ground must be profiled, section by section, to understand the true conditions. The ability to see these meter-scale changes in stress orientation without making simplifying assumptions offers a clearer, safer path forward for deep geothermal energy and other subsurface projects, ensuring that the forces of the deep earth are understood before they are ever challenged.

Drowning in papers in your field?

Get daily digests of the most novel papers matching your research keywords — with technical summaries, in your language.

Try Digest →